Sep 18, 2020 by PrimeClean
Cleaning your CPAP equipment is mandatory. You definitely want to get the best result in order to eliminate the risk of infection, skin irritation, ineffective treatment, and more. The best solution in 2020 isPrimeClean which now comes with an upgraded CPAP Sanitizer Bag and ozone filter. All the things you need to know will be explained in detail below. Without further ado, let’s begin.
It is essential to clean the CPAP hose and a mask at least once per week. During the pandemic, this should be done even more frequently. Ideally, you will do this once per day, in the morning after you are done with the treatment.
Using PrimeClean can be very beneficial. It can kill 99.9% of bacteria, germs, and viruses. Believe it or not, it can kill the COVID19 virus as well. All you need are 30 minutes of your time and you are done. Your CPAP equipment will be perfectly clean and you can enjoy the treatment as much as you like. Now, there is an additional sanitizer bag and an ozone filter to help you get even better results.
PrimeClean aims for perfection. It is a device that has been carefully designed by professionals in order to provide the best and safest results. That’s why it uses ozone. It is the ultimate cleaning medium that can completely sanitize your hose and a mask for the CPAP machine within minutes. Now you have the ability to get a new sanitizer bag that offers even better results. Here are a few points about this accessory.
The goal here is obvious. A user will use a new sanitizer bag and a new ozone filter to get even better results instantly. It even comes in a modern design that makes it very appealing and stylish. Of course, the primary accent is on the usability, strength, and success rate. All of those are at the highest level possible.
To use the new sanitizer bag and an ozone filter, you need a few minutes to set all up. Below you can see detailed instructions regarding the matter. Keep in consideration that the same instructions should be used regardless of which mask and a hose you use. Make sure the battery on yourPrimeClean is full. It is a 2200 mAh battery that requires 2 hours to be fully recharged. Once full, you will see a green LED light on the device. Anyway, follow these steps mentioned below.
1. Open the sanitizer bag using the zipper
2. Place an ozone filter in its slot (located on the top lid)
3. Place the mask and the hose inside the bag and close it
4. Connect the PrimeClean to the bag
5. Press and hold the power button for 3 seconds to activate the unit
6. Wait for 30 minutes
Once done, you can disconnect the PrimeClean and open the bag to remove your mask and a hose. You can also place a humidifier inside the bag for the sanitization process. It should be sanitized once per week. The only, additional thing to keep in mind is that humidifiers should be completely dry and empty. It should not contain any traces of water.
There are a few different things to keep in mind. First of all, the mask and the hose should be cleaned on a regular basis, more frequently than any other component. This is mandatory due to the fact they come in contact with the skin all the time and they can collect oils, sweat, and germs more likely than anything else. Ideally, you will use the steps we have listed above once per day. You only need 30 minutes so you don’t need a massive amount of time.
Humidifier, if your machine has it should be cleaned once per week. Once again, make sure it doesn’t contain any water and it is dry before using it. There is no need to wipe it down or anything similar when using our new CPAP sanitizer bag and ozone filter.
The rest of the CPAP machine should be cleaned as well. You will need to wipe all down and replace the filters at least once per month. We recommend doing this even more frequently during the pandemic.
There are a few, main, and a few additional benefits you will get when using the new PrimeClean bag. They are very important and they can make a massive difference between successful treatment and various complications.
First and foremost, you will make sure that the treatment is successful. This simply means that when the bag and the new ozone filter are used, there won’t be any bacteria, viruses, and germs on the mask. They can accumulate overnight and especially if your machine has a humidifier. It creates a moisture environment ideal for bacteria and germs. They can cause countless issues that will make treatment ineffective or problematic.
At the end of the day, you are still using ozone to sanitize your equipment. There are many alternatives, but this one is the best. It is100% safe simply because once used, ozone will be converted to the oxygen you breathe normally. The sanitizer bag offers a perfect airtight seal that will eliminate the risk of ozone leaks.
When the CPAP hose and a mask are not leaned on a regular basis, they are covered with sweat, skin cells, bacteria, germs, and viruses. This means that you won’t be able to use them and you will have to replace them. Using PrimeClean and sanitizer bags will help you use these much longer.
Pin most cases, dirty or affected CPAP mask or a hose can cause skin irritations, problems breathing, and even more severe issues. Cleaning them a regular basis using ozone is the best thing you can actually do these days.
Using a new sanitizer bag and a filter is extremely simple. You need 1-2 minutes to connect all the dots and literally 3 seconds to startPrimeClean. Once done, you can remove the gear from the bag and you are done.
Ozone is the most effective method used for sanitizing CPAP machine sand equipment out there. It is effective 99.9% while others are effective 70-80%. There is no risk of any kind and you can use the same method on literally any equipment.
New CPAP sanitizer bag and Ozone Filter definitely makes an old treatment even better. Now, you can expect overall simplicity while the success rate is still at the maximum. The goal here is to enjoy the CPAP treatment, to get a successful treatment, and to manage your sleep apnea or other sleeping disorder as much as possible.